2600c user manual

Unauthorised antennas, modifications or attachments could damage the phone and may violate regulations governing radio devices. All of the above suggestions apply equally to the product, battery, charger or any accessory. Nokia requires that service points have sufficient ESD protection against static electricity when servicing the phone.

Any product of which the covers are removed must be handled with ESD protection. All electronic parts of the product are susceptible to ESD. Resistors, too, can be damaged by static electricity discharge. Every repair action involving opening the product or handling the product components must be done under ESD protection. Note: A new battery's full performance is achieved only after two or three complete charge and discharge cycles! The battery can be charged and discharged hundreds of times but it will eventually wear out.

When the operating time talk-time and standby time is noticeably shorter than normal, it is time to buy a new battery. Use only batteries approved by the phone manufacturer and recharge the battery only with the chargers approved by the manufacturer. Unplug the charger when not in use. Do not leave the battery connected to a charger for longer than a week, since overcharging may shorten its lifetime.

If left unused a fully charged battery will discharge itself over time. Do not attempt to discharge the battery by any other means. Use the battery only for its intended purpose. Never use any charger or battery which is damaged.

Do not short-circuit the battery. Short-circuiting the terminals may damage the battery or the connecting object. Leaving the battery in hot or cold places, such as in a closed car in summer or winter conditions, will reduce the capacity and lifetime of the battery.

A phone with a hot or cold battery may temporarily not work, even when the battery is fully charged. Batteries' performance is particularly limited in temperatures well below freezing. Do not dispose of batteries in a fire!

Dispose of batteries according to local regulations e. Do not dispose as household waste. Our policy is of continuous development; details of all technical modifications will be included with service bulletins. While every endeavour has been made to ensure the accuracy of this document, some errors may exist.

Hardware features Software features UI features Mobile enhancements Table 1 Power Table 2 Car Table 3 Audio Service devices Service concepts Flash concept with FPS EM calibration concept with JBV Figure 4 Flash concept with FPS The table below gives a short overview of service devices that can be used for testing, error analysis, and repair of product RM; RM For the correct use of the service devices, and the best effort of workbench setup, please refer to various concepts.

The docking station adapter is used for this phone in combination with JBV The adapter supports flashing and energy management calibration,. Note: Docking station adapters valid for DCT4 products. FLS-5 is a dongle and flash device incorporated into one package, developed specifically for POS use.

The JBV-1 docking station is a general tool that has been designed for calibration and software update use. The JBV-1 is used together with a docking station adapter as one unit. When flashing the power for the phone must be taken from the flash prommer.

The PCS-1 power cable DC is used with a docking station, a module jig or a control unit to supply a controlled voltage. PK-1 is a hardware protection key with a USB interface.

It has the same functionality as the PKD-1 series dongle. To use this USB dongle for security service functions please register the dongle in the same way as the PKD-1 series dongle. SW security device is a piece of hardware enabling the use of the service software when connected to the parallel LPT port of the PC. Printer or any such device can be connected to the PC through the device if needed. The following table shows attenuations from the antenna pads of the mobile terminal to the SMA connectors of SA Please see this document here for current information regarding the Apache Log4j vulnerability.

Check documents and videos on compatibility, FAQs, upgrade information and available fixes. Windows 11 Support Center. Warranty status: Unspecified - Check warranty status Manufacturer warranty has expired - See details Covered under Manufacturer warranty Covered under Extended warranty , months remaining month remaining days remaining day remaining - See details.

Serial number:. Product number:. Warranty end date:. Warranty removed from product: This product was designated to be returned to HP. Thus, the warranty has been removed from this product. Product sold by third party: This product was sold by a third party.

Any warranty support needed would be completed by the third party that sold the product. Product has been exchanged: This product has been exchanged for a new or refurbished product.

Please use the product number and serial numbers of the new product to validate warranty status. Product sold without warranty: This product was sold by a reseller. Any warranty support needed would be completed by the reseller that sold the product. The serial number provided does not match the previously selected product. It matches the product:. Please return to the product information page and verify the numbers provided or try again later.

Errors can be displayed in many formats. Please include all extra characters, such as hyphens or colons or periods as they appear within the number. Possible error formats where 'x' could represent a letter or number : xx. One or more of the values entered is not permitted.

Please wait while we process your request. This process can take several minutes depending on the number of warranties being checked. The availability of particular products may vary by region. Please check with the Nokia dealer nearest to you. This device may contain commodities, technology or software subject to export laws and regulations from the US and other countries.

Diversion contrary to law is prohibited. Add page 4 to Favourites. Getting started Call functions Writing text Menu functions Add page 5 to Favourites. List of menu functions Add page 6 to Favourites. Enhancement settings Battery information Add page 7 to Favourites. Not following them may be dangerous or illegal.

Read the complete user guide for further information. Always keep your hands free to operate the vehicle while driving. Your first consideration while driving should be road safety. Switch the phone off near medical equipment.

Wireless devices can cause interference in aircraft. Dont use near fuel or chemicals. Dont use the phone where blasting is in progress. Add page 8 to Favourites. Dont touch the antenna unnecessarily.