Windows system32 config corrupt missing

Was the issue preceded by a power interruption, aborted restart, or improper shutdown? These can cause corruption in the file system which must be fixed before you do anything else. If any of those events have occurred or even if they have not occurred , you should verify the integrity of your file system before doing anything else especially "trying" things. It makes zero sense to start trying to copy files around on a hard disk that has a corrupted file system so this must be fixed first using the XP chkdsk program, and running chkdsk may resolve your issue entirely.

Use the XP Recovery Console to verify the file system on your HDD and correct any problems and then try to boot your system - this may be all you need to do. Or, you are welcome to just start trying things that might work. This is not the same as any recovery disks that might have come a store bought system.

Let chkdsk finish and correct any problems it might find. It may take a long time to complete or appear to be 'stuck'. Be patient. If the HDD light is still flashing, it is doing something. Keep an eye on the percentage amount to be sure it is still making progress. It may even appear to go backwards sometimes.

If there are some problems such as bad sectors on hard drive , you may also encounter the error that Windows could not start because the following file is missing or corrupt. Then the chkdsk utilities will begin to scan your hard drive. When the scanning process is finished, reboot your computer and check whether the problem that Windows could not start because the following file is missing or corrupt is solved.

If there are corrupt system files on your computer, you may also come across the error that Windows could not start because the following file is missing or corrupt. In this situation, you can run the Windows built-in tools — System File Checker to scan and repair the corrupt system files on your computer. When the scanning process is finished, reboot your computer and check whether the error that Windows could not start because the following file is missing or corrupt is solved.

The problem that Windows failed to load because the system registry file is missing or corrupt can be fixed by replacing it with a clean copy that was created on the hard drive when Windows was installed. Before proceeding on, you had better back up the current registry files so that they could be restored if anything goes wrong. After that, exit the command line window and reboot your computer to check whether the error that Windows could not start because the following file is missing or corrupt is solved.

If none of the above solutions takes effect, you can choose to reinstall the operating system. But before reinstalling, the first thing you need to do is to export your data. After retrieving data from the unbootable computer due to the error that Windows could not start because the following file is missing or corrupt, you can start to reinstall the operating system.

Then you can follow the wizard to complete Windows installation. When the process is finished, the computer can boot normally and you also have fixed the problem that Windows could not start because the following file is missing or corrupt. After fixing the problem that Windows failed to load because the system registry file is missing or corrupt, it is recommended to create a system image. In this way, it can effectively safeguard your computer and files.

In addition, you can directly restore your computer to a normal state when encountering some problems or coming across the issue that Windows could not start because the following file is missing or corrupt again. To create a system image, MiniTool ShadowMaker is able to do that.

Related: Windows root system32 hal. I have 2 hard disks on my PC and both have win xp installed. The funny thing is that the same message appears no matter which of the 2 os I choose at start up.

However when I move the same 2 hard drives to another computer they work perfectly. I read somewhere on the internet to remove the pc battery with the main power disconnected and leave it overnight. I tried this and it worked. The system also does not boot from cd even after me changing the bios settings but previously it used to boot from cd without problems. I am trying this process. I will let you know whether it is working for me or not. Click to select any options that are required to start the computer from the CD-ROM drive if you are prompted to do so.

If you have a dual-boot or multiple-boot computer, select the installation that you want to access from the Recovery Console. When you are prompted to do so, type the Administrator password. Type exit to quit Recovery Console. Your computer will restart. A problem has been detected and Windows has been shut down to prevent damage to you computer. Answered by:. Archived Forums. Sign in to vote. I have read a few articles about how to fix this but I still have a couple of questions: - I have tried putting in the Dell re-installation CD for Windows XP Professional Service Pack 2 in the hope it would load a programme where I could hit 'r' and it would fix everything.

Any help would be much appreciated! Saturday, September 18, AM. Thanks for the help Senne, I will try and follow the instructions in the article. Sunday, September 19, AM. To make your pc boot from cd, change the boot sequence in BIOS or hit a key to enter the on-time boot menu i believe on most dell's this is F12 Booting from the last known good configuration normally doe snot make anything worse.

Saturday, September 18, PM. Best Solution the xp disk! Hi Everyone. Monday, September 20, PM. Hi The MS article should fix it!